Incorporated in 1850, one of the county's oldest towns
Concrete Contractors in Archer, FL
Slabs, driveways, patios and repairs for a small railroad town and the farms around it.
- Free on-site measuring visit
- Written, itemized quote for every job
- Base, drainage and thickness spelled out before we pour
Concrete Work in and Around Archer
Archer is small, but concrete contractors in Archer cover a lot of ground. The 2020 census counted 1,140 residents and 506 housing units inside the city, and many more homes sit on farm and ranch land in the surrounding part of southwest Alachua County. Settled in the 1840s as Deer Hammock and incorporated in 1850, Archer moved east to meet the Florida Railroad when it arrived in 1858, and the first trains stopped in 1859. The town is named for James T. Archer, Florida's first Secretary of State. We pour driveways, patios, walks and slabs here, and repair concrete that has cracked or settled.
Small-town lots
Inside the city, homes tend to be modest and the lots are an older pattern than the subdivisions closer to Gainesville. Common jobs include replacing a broken front walk, pouring a carport or driveway where there used to be grass or gravel, and adding a back patio. Many older homes have little or no concrete at all, so a new driveway apron and walk can make a big difference in how the house works day to day, especially in the rainy season when sand drives rut and wash out.
Farm and acreage work
Outside town, the work gets bigger. Owners ask for barn aisles, wash racks, feed room floors, equipment pads, shop slabs and long walkways between buildings. Those slabs need a thickness and base matched to what will sit on them, from a riding mower to a loaded truck. We also form slabs for metal buildings, which usually come with an engineered anchor layout and need a building permit. We work from the building supplier's drawings so the anchors land exactly where the frame needs them.
Western county ground
Archer sits in the western part of Alachua County, the area the county's sinkhole fact sheet identifies as most likely to see sinkholes, because the limestone below has only a thin cover of permeable sand. Sinkholes are not common under a typical driveway, but the sandy soil itself drains fast and shifts easily. That makes compaction the most important part of the job. We compact the base, set drainage so water leaves the slab and keep downspouts from dumping at slab edges. If a site shows a sudden low spot, we recommend a professional evaluation before pouring.
Permits and county roads
The City of Archer handles permits inside city limits. Most rural parcels around Archer are unincorporated Alachua County, where a new driveway connection to a county road goes through a Public Works right-of-way connection permit with a location inspection and final approval. We check the address, file what is needed and request Sunshine 811 locates at least two full business days before digging.
What we pour around Archer
- Driveways, aprons and carport slabs
- Patios and porch slabs
- Walks and steps
- Barn, shop and equipment slabs
- Metal building foundations from supplier plans
- Repair of cracked and settled sections
Call (352) 558-2464 to book a visit in Archer or out on the county roads around it.
Archer Facts for a Concrete Project
- Early town. Settled in the 1840s as Deer Hammock, Archer was incorporated in 1850 and named for Florida's first Secretary of State.
- Railroad shift. The Florida Railroad arrived in 1858, moving the town site east; the first trains stopped in Archer in 1859.
- Housing. The 2020 census counted 1,140 residents and 506 housing units inside the city.
- Ground. Alachua County lists the western county as the area where sinkholes form most often, due to thin sand over limestone.

Archer Questions
Do I need a permit for a new driveway onto a county road near Archer?
For unincorporated parcels, Alachua County Public Works issues right-of-way connection permits for driveways, with a location inspection and final approval. We confirm the requirement for your address and handle the paperwork with you.
How thick should a barn or shop slab be?
It depends on the loads. A slab for hand tools and a mower is different from one that carries a tractor or loaded trailer. We size thickness, base and reinforcement to the use, and follow engineered plans when the building comes with them.
Can you pour a slab for a metal building kit?
Yes. We pour from the supplier's foundation drawings so anchor bolts and edges match the frame. These buildings usually need a building permit, which we confirm before scheduling.
Free Estimates in Archer, FL
Tell us about your Archer property and project, and we will set up a free estimate.
Concrete Contractors Near Archer
- Concrete Contractors in Gainesville, FL
- Concrete Contractors in Alachua, FL
- Concrete Contractors in Newberry, FL
- Concrete Contractors in High Springs, FL
- Concrete Contractors in Hawthorne, FL
- Concrete Contractors in Micanopy, FL
- Concrete Contractors in Waldo, FL
- Concrete Contractors in LaCrosse, FL
- Concrete Contractors in Haile Plantation, FL
- Concrete Contractors in Jonesville, FL
- Concrete Contractors in Melrose, FL
- Concrete Contractors in Williston, FL
- Concrete Contractors in Starke, FL
- Concrete Contractors in Keystone Heights, FL
- Concrete Contractors in Cross Creek, FL
- Concrete Contractors in Trenton, FL
- Concrete Contractors in Bronson, FL
- Concrete Contractors in McIntosh, FL
- Concrete Contractors in Fort White, FL
- Concrete Contractors in Evinston, FL
- Concrete Contractors in Bell, FL
- Concrete Contractors in Brooker, FL
- Concrete Contractors in Hampton, FL